Cleveland Range inverter manual Control Method

	Control Method				V/F Control
CONTROL	Frequency Setting Resolution				Digital Reference: 0.01 Hz (Below 100 Hz), 0.1 Hz (Over 100 Hz)
					Analog Reference: 0.03 Hz / 50 Hz
	Frequency Accuracy				Digital: 0.01 % of Max. Output Frequency, Analog: 0.1 % of Max. Output Frequency
	V/F Ratio				Linear, Square Patter, User V/F
	Overload Capacity				150 % of Rated Current for 1 Min. (Characteristic is inversely Proportional to Time)
	Torque Boost				Manual Torque Boost (0 ~ 15 %), Auto Torque Boost
		Operation Method			Key / Terminal / Communication Operation
		Frequency Setting			Analog: 0 ~ 10V / 4 ~ 20 mA	Digital: Keypad
	Signal	Start Signal			Forward, Reverse
		Multi-Step Speed			Up to 8 Speeds Can Be Set (Use Multi-Function Terminal)
		Multi Step Accel/Decel Time			0 ~ 9,999 sec, Up to 4 Types Can Be Set and Selected for Each Setting (Use Multi-
					Function Terminal), Accel/Decel Pattern: Linear Pattern, U Pattern, S Pattern
		Emergency Stop			Interrupts the Output of Inverter
		Jog			Jog Operation
		Fault Reset			Reset Faults When Protective Function is Active
OPERATION	SignalInput	Operating Status			Frequency Level Detection, Overload Alarm, Stalling, Over Voltage, Under Voltage,
					Inverter Overheating, Running, Stop, Constant Speed, Speed Searching
		Fault Output			Contact Output (A, C, B) – AC250V 1A, DC30V 1A
	Output
		Indicator			Choose One From Output Frequency, Output Current, Output Voltage, DC Voltage
					(Output Voltage: 0 ~ 10V)
	Operation Function				DC Braking, Frequency Limit, Frequency Jump, Second Function, Slip
					Compensation, Reverse Rotation Prevention, Auto Restart, PID Control
	Inverter Trip				Over Voltage, Under Voltage, Over Current, Inverter Overheating, Motor Over
Protection					heating, Input/Output Phase Loss, Overload Protection, Communication Error, Loss
					of Speed Command, Hardware Fault
	Inverter Alarm				Stall Prevention, Overload Alarm
	Momentary Power Loss				Less than 15 msec: Continuous Operation,
					More than 15 msec: Auto Restart (Programmable)
Display	Keypad			Operation Information	Output Frequency, Output Current, Output Voltage, Frequency Value Setting,
					Operating Speed, DC Voltage
				Trip Information	Indicates Fault when Protection Function Activated, Memorizes Up to 5 Faults
	Ambient		Temperature		-10 °C ~ 40 °C (14 °F ~ 104 °F), CE Certification: 41 °F ~ 104 °F (5 °C ~ 40 °C)
Environment	Storage Temperature				-20 °C ~ 65 °C (-4 °F ~ 149 °F)
	Ambient Humidity				Less Than 90 % RH Max. (Non-Condensing),
					CE Certification: 5 ~85% (Non-Condensing)
	Altitude / Vibration				Below 1,000 m · Below 5.9m/sec² (=0.6g)
	Application Site				No Corrosive Gas, Combustible Gas, Oil Mist, or Dust
	Atmospheric Pressure				70 ~ 106kPa
Cooling Method					Forced Air Cooling4

4‘Self-cooling’ for model SV004ACtionMaster -4, SV008ACtionMaster -4.

4