Cleveland Range inverter manual Function Group 1 FU1, Parameter List

Chapter 3 - Parameter List

3.2 Function Group 1 [FU1]

Code	Description	Keypad	Setting Range		Units		Factory	Adj.	Page
								During
		Display					Default
								Run
FU1-00	Jump to Desired Code #	F 0	1 to 99		1	3		Yes	39
FU1-03	Run Prevention	F 3	0 (None)		-		0 (None)	No	39
			1 (Forward Prev)
			2 (Reverse Prev)
			0 (Linear)
FU1-05	Acceleration Pattern	F 5	1 (S-Curve)		-		0 (Linear)	No	39
			2 (U-Curve)
			3 (Minimum)
			4 (Optimum)
			0 (Linear)
FU1-06	Deceleration Pattern	F 6	1 (S-Curve)		-		0 (Linear)	No	39
			2 (U-Curve)
			3 (Minimum)
			4 (Optimum)
FU1-07	Stop Mode	F 7	0 (Decel)		-		0 (Decel)	No	40
			1 (DC-Brake)
			2 (Free-Run)
FU1-087	DC Injection Braking Frequency	F 8	(FU1-22) to 50/60 [Hz]		0.01		5.00 [Hz]	No
FU1-09	DC Injection Braking On-delay Time	F 9	0 to 60 [sec]		0.01		0.10 [sec]	No	41
FU1-10	DC Injection Braking Voltage	F 10	0 to 200 [%]		1	50 [%]		No
FU1-11	DC Injection Braking Time	F 11	0 to 60 [sec]		0.1		1.0 [sec]	No
FU1-12	Starting DC Injection Braking	F 12	0 to 200 [%]		1	50 [%]		No	41
	Voltage
FU1-13	Starting DC Injection Braking Time	F 13	0.0 to 60.0 [sec]		0.1		0.0 [sec]	No
FU1-20	Maximum Frequency	F 20	40.00 to 400.00 [Hz]		0.01		50 / 60 [Hz]	No	42
FU1-21	Base Frequency	F 21	30.00 to (FU1-20)		0.01		50 / 60 [Hz]	No
FU1-22	Starting Frequency	F 22	0.10	to 10.00 [Hz]	0.01		0.10 [Hz]	No
FU1-23	Frequency Limit Selection	F 23	0 (No)		-		0 (No)	No
			1 (Yes)						42
FU1-248	Low Limit Frequency	F 24	0.00	to (FU1-25)	0.01		0.00 [Hz]	No
FU1-25	High Limit Frequency	F 25	(FU1-24) to (FU1-20)		0.01		50 / 60 [Hz]	No
FU1-26	Manual/Auto Torque Boost	F 26	0 (Manual)		-		0 (Manual)	No
			1 (Auto)
	Selection								43
FU1-27	Torque Boost in Forward Direction	F 27	0.0 to 15.0 [%]		0.1	2.0 [%]		No
FU1-28	Torque Boost in Reverse Direction	F 28			0.1	2.0 [%]		No

7Code FU1-08 through FU1-11 appears only when FU1-07 is set to ‘DC-brake’.

8Code FU1-24 through FU1-25 appears only when FU1-23 is set to ‘Yes’.

25