Cleveland Range inverter manual Parameter List, Xcel-L

Chapter 3 - Parameter List

		Keypad					Factory	Adj.
Code	Description		Setting Range			Units		During	Page
		Display					Default
								Run
			3 (XCEL-L)
			4 (XCEL-M)
			5 (XCEL-H)
	8, 15, 17, 20, 21,		6 (Dc-brake)
			7 (2nd Func)
	22, 23, 24, 25, 26
			9 (V1-Ext)
	(-Reserved-)
			10 (Up)
			11 (Down)
			12 (3-Wire)
			13 (Ext Trip-A)
			14 (Ext Trip-B)
			16 (Open-Loop)
			18 (Analog Hold)
			19 (XCEL Stop)
I/O-13	Multi-function Input Terminal ‘P2’	I 13	Same as above I/O-12		-		1 (Speed-M)	No
	Define								64
I/O-14	Multi-function Input Terminal ‘P3’	I 14	Same as above I/O-12		-		2 (Speed-H)	No
	Define
I/O-15	Terminal Input Status	I 15	00000000 – 11111111		-		00000000	-	67
			(bit set)
I/O-16	Terminal Output Status	I 16	0 – 1 (bit set)		-		0	-
I/O-17	Filtering Time Constant for Multi-	I 17	2 to 50		1		2	Yes	67
	function Input Terminals
I/O-20	Jog Frequency Setting	I 20	0.00	to (FU1-20)			10.00 [Hz]	Yes	67
I/O-21	Step Frequency 4	I 21	0.00	to (FU1-20)	0.01		40.00 [Hz]	Yes
I/O-22	Step Frequency 5	I 22	0.00	to (FU1-20)			50.00 [Hz]	Yes	67
I/O-23	Step Frequency 6	I 23	0.00	to (FU1-20)			40.00 [Hz]	Yes
I/O-24	Step Frequency 7	I 24	0 .00 to (FU1-20)				30.00 [Hz]	Yes
I/O-25	Acceleration Time 1	I 25	0.0 to 999.9 [sec]		0.1		20.0 [sec]	Yes	68
	for Step Frequency
I/O-26	Deceleration Time 1	I 26	0.0 to 999.9 [sec]		0.1		20.0 [sec]	Yes
	for Step Frequency
I/O-27	Acceleration Time 2	I 27	0.0 to 999.9 [sec]		0.1		30.0 [sec]	Yes
I/O-28	Deceleration Time 2	I 28	0.0 to 999.9 [sec]		0.1		30.0 [sec]	Yes
I/O-29	Acceleration Time 3	I 29	0.0 to 999.9 [sec]		0.1		40.0 [sec]	Yes
I/O-30	Deceleration Time 3	I 30	0.0 to 999.9 [sec]		0.1		40.0 [sec]	Yes
I/O-31	Acceleration Time 4	I 31	0.0 to 999.9 [sec]		0.1		50.0 [sec]	Yes
I/O-32	Deceleration Time 4	I 32	0.0 to 999.9 [sec]		0.1		50.0 [sec]	Yes
I/O-33	Acceleration Time 5	I 33	0.0 to 999.9 [sec]		0.1		40.0 [sec]	Yes
I/O-34	Deceleration Time 5	I 34	0.0 to 999.9 [sec]		0.1		40.0 [sec]	Yes

31