Cleveland Range inverter manual Input/Output Group I/O, Parameter List

Chapter 3 - Parameter List

		Keypad			Factory	Adj.
Code	Description		Setting Range	Units		During	Page
		Display			Default
						Run
			0 (No)
			1 (All Groups)
FU2-93	Initialize Parameters	H 93	2 (DRV)	-	0 (No)	No	60
			3 (FU1)
			4 (FU2)
			5 (I/O)
FU2-94	Parameter Write Protection	H 94	0 to 25518	1	0	Yes	60
FU2-99	Return Code	rt		-	-	Yes	60

3.4 Input/Output Group [I/O]

		Keypad			Factory	Adj.
Code	Description		Setting Range	Units		During	Page
		Display			Default
						Run
I/O-00	Jump to Desired Code #	I 0	1 to 99	1	1	Yes	62
I/O-01	Filtering Time Constant for V1	I 1	0 to 9999 [ms]	1	100 [ms]	Yes
	Signal Input
I/O-02	V1 Input Minimum Voltage	I 2	0 to I/O-04	0.01	0.00 [V]	Yes
I/O-03	Frequency corresponding to V1	I 3	0 to FU1-20	0.01	0.00 [Hz]	Yes	62
	Input Minimum Voltage
I/O-04	V1 Input Maximum Voltage	I 4	(I/O-02) to 12.00 [V]	0.01	10.00 [V]	Yes
I/O-05	Frequency corresponding to V1	I 5	0.00 to (FU1-20)	0.01	50 / 60 [Hz]	Yes
	Input Maximum Voltage
I/O-06	Filtering Time Constant for I Signal	I 6	0 to 9,999 [ms]	1	100 [ms]	Yes
	Input
I/O-07	I Input Minimum Current	I 7	0.00 to (I/O-09)	0.01	4.00 [mA]	Yes
I/O-08	Frequency corresponding to I Input	I 8	0.00 to (FU1-20)	0.01	0.00 [Hz]	Yes	62
	Minimum Current
I/O-09	I Input Maximum Current	I 9	(I/O-07) to 24.00[mA]	0.01	20.00 [mA]	Yes
I/O-10	Frequency corresponding to I Input	I 10	0.00 to (FU1-20)	0.01	50 /60 [Hz]	Yes
	Maximum Current
I/O-11	Criteria for Analog Input Signal Loss	I 11	0 (None)	-	0 (No)	Yes	63
			1 (Half of x1)
			2 (Below x1)
I/O-12	Multi-function Input Terminal ‘P1’	I 12	0 (Speed-L)	-	0 (Speed-L)	No	64
	Define		1 (Speed-M)
			2 (Speed-H)

18This function is used to lock the parameters from being changed. Keypad displays “U 0” when the parameters are unlocked and “L 0” when locked. The lock and unlock code is ‘12’.

30