Cleveland Range inverter manual Parameter List

Chapter 3 - Parameter List

		Keypad				Factory	Adj.
Code	Description		Setting Range		Units		During	Page
		Display				Default
							Run
			2 (Stop)
I/O-49	Waiting Time after Loss of Freq.	I 49	0.1 to 120.0 [sec]	0.1		1.0 [sec]	Yes
	Reference
I/O-50	Communication Protocol Selection	I 50	0 (CMC- Bus ASCII)	-		7 (Modbus-	Yes	73
			7 (Modbus-RTU)			RTU)
I/O-99	Return Code	rt		-		1	Yes	73

Note: Parameters that are set by a bit are ON (1) when the upper LED is lit as shown below. (F59, H19, H22, I15, I16, I45 are the parameters that are set by bit.)

Example) when the keypad displays ‘00000011’

1:ON

1:OFF

Bit 7

Bit 0

Note: FU1-20, FU1-21, FU1-25, FU1-36, FU2-54, FU2-83, I/O-05 and I/O-10 are set at 50Hz for Standard (EU) types and 60Hz for US types. Please check these parameters before commissioning to veryfiy that you have the right product.

33