Compaq LTE 5000 manual Working with Removable Drives

. . . . . . . . . . . . . . . . . . . . . . . . .

Hard drives that have secondary-drive capability have the following symbol on the label located on top of the drive:

If you have LTE Elite hard drives that do not have secondary-drive capability, you can use them in the LTE 5000 computer with the limitations described later in this section.

Using LTE Elite Hard Drives That

Have Secondary-Drive Capability

You can use LTE Elite hard drives that have secondary-drive capability the same way you would use additional LTE 5000 hard drives. Follow the steps described earlier in this chapter to insert up to three in the computer and expansion base MultiBays. Start (boot) the computer from the original LTE 5000 hard drive in the dedicated hard drive bay.

Using LTE Elite Hard Drives That Do

Not Have Secondary-Drive Capability

LTE Elite hard drives that do not have the secondary-drive capability symbol must be used in the primary drive bay in the computer or MultiBay I in the expansion base.

Before beginning one of the procedures to insert the drive, run Computer Setup and ensure that the hard drive boot sequence on the Initialization menu is set to the factory default of:

1.Hard drive in the computer

2.Hard drive in the computer MultiBay

3.Hard drive in the expansion base MultiBay I

4.Hard drive in the expansion base MultiBay II

Refer to Chapter 10, "Running Computer Setup," for information about setting up your computer.

Working with Removable Drives 6-27