Compaq LTE 5000 manual Securing a Drive in the Computer MultiBay

. . . . . . . . . . . . . . . . . . . . . . . . .

Computer MultiBay

The following procedures describe inserting and removing drives from the computer MultiBay. The procedures are similar to insert drives into and remove drives from the expansion base MultiBays.

One difference between the computer MultiBay and the expansion base MultiBays is the provision to secure a drive in the computer MultiBay. There are no provisions to secure drives in the expansion base MultiBays.

Securing a Drive in the Computer MultiBay

Four security screws are supplied with the computer to secure drives in the dedicated hard drive bay and the computer MultiBay (two screws are spares). Insert one of the screws to help prevent unauthorized removal of a drive that is in the computer MultiBay.

Use a flat-bladed or Torx T-8 screwdriver to insert the security screw into the bottom of the computer as illustrated below. The screw fits through a slot in the drive or the MultiBay Hard Drive Carrier to hold it in place.

Securing a Drive in the Computer MultiBay

Working with Removable Drives 6-11