DI-1162 Remote Access Router

DNS Configuration

The DI-1162 router has a built in recursive DNS server. The maximum amount of memory that will be used by the router’s Domain Name Server is 64Kb which averages out to be about 800 entries. In other words, up to 800 domain names and their associated IP Addresses can be stored, which can significantly speed up access to those domains. The routers DNS table will age out about every 24 hours, ensuring that the most frequently accessed domains consistently benefit from the improved access times provided by using the routers own DNS.

The IP Addresses for domain names not stored in the router must be acquired from a DNS server on the Internet. Thus, if you are using DNS, make sure you also specify an IP Address to a DNS server in the Forward DNS queries to field.

The items in the above submenu are described as follows:

DNS Server State – enable/disables recursive DNS on this router.

Configuration and Management

91

Page 101
Image 101
D-Link DI-1162 manual DNS Configuration