DI-1162 Remote Access Router
The parameters are described below:
•SNMP Community String – this community string is a user- defined identifying name used to group together some arbitrary set of SNMP application entities managed by the network manager.
•Access Right – this element of the set { READ ONLY, READ/WRITE } is called the SNMP access mode. If the SNMP Community String has an Access Right of READ/WRITE, then that Community String is available as an operand for the get, set, and trap operations. Otherwise, if the Community String’s corresponding Access Right is READ ONLY, then it is available as an operand for the get and trap operations only.
•State – this validates or invalidates the use SNMP Community String, by setting the string to ‘Valid’ or ‘Invalid’. Note that setting the use of the string to ‘Invalid’ is the same as removing the string, however, the string remains so as to be validated at an appropriate time.
SNMP Trap Manager
From the SNMP Agent Configuration menu, select and enter the SNMP Trap Manager
44 | Configuration and Management |
