DI-1162 Remote Access Router

Ping Test

This test makes sure there is an IP network connection to a particular IP address.

IP Address – This is the IP Address of the device that the router will attempt to reach. The router will check it routing table and try to locate the IP Address.

Count – The number of pings (packets) that will be sent.

Delay (10ms) – The amount of time in 10 millisecond intervals between each ping in the Count.

Start Ping Test - Press <Enter> or <Return> to begin the test.

System LAN Test

The System LAN test is used to diagnose the LAN port. It can only be run if the LAN port is disabled in the Interface Configuration submenu.

114

Configuration and Management

Page 124
Image 124
D-Link DI-1162 manual Ping Test, System LAN Test