DI-1162 Remote Access Router
LED |
| STATUS/ FUNCTION |
|
|
|
Power |
| Lights whenever the router is plugged in, turned on, and thus |
|
| receiving power. |
|
|
|
Diag |
| Lights during the startup POST test. |
|
|
|
Boot |
| Lights briefly during startup after the PROM program has |
|
| executed. Indicates a successful boot up. |
|
|
|
Run |
| Should be slowly blinking if the router is functioning properly. |
|
|
|
| 10/100 | This LED is ON for a 100Mbps link, and OFF for a 10Mbps |
|
| link. |
|
|
|
| Link/Act | This LED is ON to show a good link to the LAN, and quickly |
LAN |
| flashes to show communication activity on the line. |
|
| |
| Full/Half | This LED is ON for a |
|
| |
|
|
|
| Col | The LED flashes to show transmission collisions on the line. |
|
|
|
WANs | Ready | This LED is ON to show a good modem or CSU/DSU link to |
| the WAN port. | |
1 & 2 |
| |
|
| |
| Act | This LED flashes to show communication activity on the line. |
|
|
|
| Ready | This LED is ON to show a good modem or CSU/DSU link to |
Module |
| the WAN module, or a good link to the LAN port module. |
|
| |
| Act | This LED flashes to show communication activity on the line. |
|
|
|
|
|
|
10 | Installation |
