DI-1162 Remote Access Router

Choose Exit in the sub-menus to return to the Main Menu.

2.Enable IP Networking

Choose Network Configuration, IP Configuration.

Position the cursor over the last item IP Networking

and press <space bar> to Enable it.

Position the cursor on the Save option at the bottom of the screen and press <Enter> to save the new setting.

3.Assign an IP address to the LAN port in the Network Configuration sub-menu of the Main Menu.

Still in Network Configuration, IP Configuration submenu from Step 2 above, choose IP Stack Configuration, LAN 1.

Enter a valid IP address for the LAN in the first item. You may also enter a Netmask if you wish. For more information about IP Addresses and Subnet masks, please refer to Appendix C – IP Concepts.

Position the cursor on the Save option at the bottom of the screen and press <Enter> to save the new setting.

Choose Exit in the sub-menus to return to the Main Menu

The router can now be accessed via the LAN by Telnet, the Windows- based DI-1162 Router Configuration Utility (included with the router) and other SNMP management applications.

18

Installation

Page 28
Image 28
D-Link DI-1162 manual Choose Network Configuration, IP Configuration