D-Link DI-1162 manual Administration Configuration

DI-1162 Remote Access Router

Stac Compression – this is an industry standard 4:1compression scheme. When enabled, the router will try to use Stac compression on the designated WAN port whenever possible. If the destination device is not capable of using Stac compression, the two devices will still communicate, albeit without using Stac compression. When disabled, Stac compression will never be used on this port.

Multi-Link PPP – Enables/disables multi-link PPP on this port. Individual WAN ports can be set to join the MLPPP bundle by enabling Multi-Link on each port. When enabled, the port will join the MLPPP bundle. Please note that the DI-1162 contains only one MLPPP bundle. All ports taking part in MLPPP, even the first or primary port which initially establishes the connection, must have Multi-Link enabled. The lowest numbered WAN port having MLPPP enabled is the Primary WAN Port and will not disconnect due to a BOD Low Threshold event.

Admin[istration] Configuration

This feature allows you to define two names and passwords used to login to the router for configuration and management, and is shown below:

Configuration and Management 99