DI-1162 Remote Access Router
•Range – this is the range of contiguous local addresses above (and including) the base Local IP.
•State – this toggles the enable, disable, for this NAT entry.
Dynamic NAPT
This screen (below) is how the NAT IP Pool appears, if Dynamic NATPT was chosen for the Translation Mode parameter. Each entry, in this configuration, can be used to map a single global address and multiple, contiguous local addresses to each other.
All of the parameters are the same as in Dynamic NAT, except the Global IP is a solitary, global address.
•Global IP – this is a single, globally unique IP Address of the global interface (the interface to which it is assigned, in this case, one of the WAN interfaces) that is valid on the Internet.
Configuration and Management | 85 |
