
DI-1162 Remote Access Router
you must save the changes, EXIT, and position the cursor over the NAT IP Pool to configure variables there.
Name Field Configuration Screen
The configuration screen for the name field appears as follows:
The parameters are described as follows:
•Name – this is a 12 character, alphanumeric,
•Global Interface – this is the interface corresponding to the Global IP and Range parameters, in the NAT table, to form unique IP address[es], known to the outside (regional or Internet) routers, on this interface.
•Local Interface – this is the interface corresponding to the Local IP and Range parameters, in the NAT table, to form local IP address[es], known only to this interface and the network within.
•Translation Mode – this toggles choices of four types of NATs.
82 | Configuration and Management |