D-Link DI-1162 manual Configuration and Management

DI-1162 Remote Access Router

sending and receiving data directly to the Internet and is therefore part of it. Please study the example diagram below carefully.

Please note that in the above diagram, the Gateway IP address settings for the local PC’s needs to be set to 192.168.100.1, the LAN IP address of the router.

NAT manipulates the IP addresses in packet headers on a one-to-one basis. An outgoing data packet (a packet originating from a computer on the local LAN and destined for a computer outside the private network) will have its IP address translated as shown below.

Configuration and Management 77