D-Link DI-1162 manual 108

DI-1162 Remote Access Router

!Tx Underrun Packets – Runt packets. This counter shows the number of packets transmitted by the router that are less than the allowed 64 octets minimum length. Underrun packets occur due to jam signals generated by collisions, backpressure, etc.

!Tx Lost CTS Packets – the number of Clear To Send packets that were lost by the router.

!Rx Packets – the total number of packets received by the router.

!Rx Bytes – the total number of bytes contained in packets received by the router.

!Rx Unknown Packets – the number of packets received by the router that were of an unsupported protocol.

!Rx Discard Packets – the number of packets dropped by the router.

!Rx Error Packets - number of invalid packets received by the router. This hardware counter shows the sum of NOA, Abort, CRC, Overrun, CD Lost, Framing and Parity error packets.

!Rx NOA Packets – Non-Octet Alignment. This counts the number of packets received by the router that did not end on a byte boundary. The receipt of a misaligned packet will generate a single NOA event regardless of the number of misaligned octets in the packet.

!Rx Abort Packet – the number of packets that were dropped due to user generated breaks in the transmission that occurred while a packet is being received.

!Rx CRC Packets – the number of packets received that failed the CRC checksum test.

!Rx Overrun Packets – the number of packets received that exceed the 1518 octet maximum length imposed on Ethernet packets. Overrun packets are generated by some proprietary software applications.

108 Configuration and Management