DI-1162 Remote Access Router
The parameters are described below:
•IP Address – enter the IP address of the host who will act as an SNMP Management Station. The
•SNMP Community String – the community string is a user- defined identifying name used to group together some arbitrary set of SNMP application entities managed by the network manager. Traps will be sent to the IP Address (previous parameter) as long as the corresponding Community String, in the Management Station’s trap manager software, is the same.
•Status – this validates or invalidates the use of the SNMP Community String, by setting the use of the string to Valid or Invalid. Note that setting the string to Invalid is the same as removing the string, however, the string remains so as to be validated again at an appropriate time.
Configuration and Management | 45 |
