DI-1162 Remote Access Router
Static NAT
This screen (below) is how the NAT IP Pool appears, if Static NAT was chosen for the Translation Mode parameter. Each entry in this configuration is used to map a single global IP address a single local IP address.
The parameters are described as follows:
•Global IP – this is a single, global IP Address that is valid on the Internet, or on the same subnet of the global interface.
•Local IP – this is a single, local IP Address that is not valid on the Internet.
Static NAPT
This screen (below) is how the NAT IP Pool appears, if Static NAPT was chosen for the Translation Mode parameter. Each entry in this configuration can be used to map a global address and port to a local
86 | Configuration and Management |
