D-Link DI-1162 manual Dhcp Configuration, Parameters, State

DI-1162 Remote Access Router

• ^M – <Enter> or <Return>.

♦Delay – will delay for the number of seconds defined in the Parameter field.

♦Get My IP – Will get the IP address from the ISP if the ISP sends it. This command is only valid for SLIP connections.

♦Get Srv IP – Will get the Servers IP address if it is sent. This command is only valid for SLIP connections.

♦End – Ends the script file.

Parameters

Parameters are data fields which hold text or numbers that are used in the Wait, Transmit and Delay commands.

State

Toggles to enable or disable the line item.

DHCP Configuration

The DI-1162 Router implements the Dynamic Host Configuration Protocol (DHCP), which allows the entire IP network to be centrally managed by the router. It does this by assigning IP addresses and configuration parameters to hosts as they are powered on and come onto the network. This can be a great help for network administration since many administrative tasks such as keeping track of each computer’s IP address are handled by the router. The DI-1162 can implement DHCP in one of the two ways shown below:

Configuration and Management 61