DI-1162 Remote Access Router
•SLIP – asynchronous mode used for modems.
•Async PPP - asynchronous mode used for modems.
•HDLC – synchronous mode used for CSU/DSU’s or synchronous modems using a leased line.
•Sync PPP - synchronous mode used for CSU/DSU’s or synchronous modems using a leased line.
♦Position the cursor over the State item and press <space bar>. The State will change from Disable to Enable.
♦Other Items in this screen also need to be configured such as the Phone Number and Baud Rate. Please refer to the manual for the device being connected to the WAN port for the proper settings. For more information regarding these settings, please refer to the appropriate section in the Configuration and Management chapter of this User Guide.
♦Position the cursor on the Save option at the bottom of the screen and press <Enter> to save the new setting.
♦Choose Exit in the
2.Enable IP Networking
♦Choose Network Configuration, IP Configuration.
♦Position the cursor over the last item IP Networking
and press <space bar> to Enable it.
♦Position the cursor on the Save option at the bottom of the screen and press <Enter> to save the new setting.
20 | Installation |
