D-Link DI-1162 manual Dhcp Server Configuration, Dynamic IP Pool

DI-1162 Remote Access Router

DHCP Server Configuration

When acting as a DHCP server, the DI-1162 will manage many of the IP network parameters. The DI-1162 will never assign a broadcast or network IP addresses to hosts, even if such an address is included in the specified range.

Please note that the router can act either as a DHCP Server or a DHCP Agent, but not both at the same time.

Dynamic IP Pool

The dynamic IP pool screen shown below contains the parameters that the router can set on the hosts.

62 Configuration and Management