D-Link DI-1162 manual Adding Users to the Radius Database, 192.168.0.11234

DI-1162 Remote Access Router

192.168.0.11234

should be added to the client file. The Client Name field in the file gives the IP address of the DI-1162, and the Key field should be the same as the Key field in the Radius Configuration submenu.

After a RADIUS server has been configured, the DI-1162 will use it to authenticate all users instead of checking it’s internal Dial-Up User Profile.

Adding Users to the RADIUS Database

The DI-1162 only uses the RADIUS database for user authentication; except for Password and User Name. Most standard RADIUS attribute fields are ignored by the DI-1162.

To add a user to the RADIUS database, edit the users file in the RADIUS server’s /etc/raddb directory, and add a line similar to the following:

joeuser Password = “joepassword”

Each user should have a user name/password record in the users database. It is also possible to configure an IP address for each user by adding a line in the Users database similar to the following:

Ip user Password = “iusespecificip”, Framed_IP_Address = 192.168.0.117

Using RADIUS Authentication 133