DI-1162 Remote Access Router

Dynamic NAT

This screen (below) is how the NAT IP Pool appears, if Dynamic NAT was chosen for the Translation Mode parameter. Each entry, in this configuration, can be used to map multiple, contiguous global addresses and local addresses to each other.

The parameters are described below:

Global IP – an IP Address that is globally unique and valid on the Internet. It is the base, global address for the global addresses that will be recognized by the interface in the Global Interface parameter.

Range – this is the range of contiguous, global addresses above (and including) the base Global IP.

Local IP – an IP Address that is only used in the stub domain since it is not unique. It is the base, local address for the local addresses that will be recognized by the interface in the Local Interface parameter.

84

Configuration and Management

Page 94
Image 94
D-Link DI-1162 manual Dynamic NAT