DI-1162 Remote Access Router

Commands

Script files can perform six Commands. You can choose the appropriate command by positioning the cursor in the Command field and pressing <space bar> to toggle to the appropriate command. The script commands are defined as follows:

Wait – this command waits for text defined in the Parameter field to be transmitted by the ISP. In the above example, the router will wait for the ISP to prompt for ‘Username:’. Please note that the parameters are case-sensitive and must be an exact match.

Transmit – Transmits the exact characters written in the Parameter field. There are also three keywords that can be transmitted:

^I – Username, as defined in the Remote Network Profile submenu.

^P – Password, as defined in the Remote Network Profile sub-menu.

60

Configuration and Management

Page 70
Image 70
D-Link DI-1162 manual Commands