D-Link DI-1162 manual Choose WAN1

DI-1162 Remote Access Router

♦Choose WAN1

♦Please refer to the Configuration and Management section of this manual for more detailed information regarding the items in this screen.

♦Position the cursor on the Save option at the bottom of the screen and press <Enter> to save the new setting.

5.Define and configure dial-in users who may access the router and the LAN it is connected to (if applicable).

♦From the Main Menu choose Advanced Functions,

Remote Access Configuration, Dial-In User Profile and press <Enter> in the first empty field.

♦Enter the dial-in user’s Username (might not be their real name) and Password.

♦Change the State to Enable.

♦Please refer to the Configuration and Management section of this manual for more detailed information regarding the items in this screen.

♦Position the cursor on the Save option at the bottom of the screen and press <Enter> to save the new setting.

The WAN port is now setup to receive calls from that user. At this point, you may wish to define other users who will dial-in to the router. Please note that User Profiles for dial-in users are valid for any WAN port configured to receive calls.

6.Define a WAN port for dialing out.

22 Installation