DI-1162 Remote Access Router

The parameters are described below:

IP Address – this is the base (starting) address for the IP pool of unassigned, IP addresses.

Range – this is the range of contiguous, IP addresses, above the base IP Address above. In the above example, the IP Addresses assigned would be 202.93.47.1, 202.93.47.2, … 202.93.47.100.

Netmask – this mask informs the client, how the destination IP address is to be divided into network, subnet and host parts. The netmask has ones in the bit positions in the 32-bit address which are to be used for the network and subnet parts, and zeros for the host part.

Gateway – this specifies the Gateway IP Address that will be assigned to and used by the DHCP clients.

Lease Time – this specifies the number of hours a client can lease an IP address, from the dynamically allocated IP pool. The maximum value is 65535 and a value of 0 means the lease is permanent.

Configuration and Management

63

Page 73
Image 73
D-Link DI-1162 manual Configuration and Management