D-Link DI-1162 manual Appendix E Configuration File 149

DI-1162 Remote Access Router

#ip routing stat (enable/disable) ip-stat disable

#interface decription (string name) wan-port-1 WAN SCC 1 Interface

#interface protocol type (0:SLIP, 1:HDLC, 2:SyncPPP, 3:AsyncPPP)

protocol-type 0

#modem initial string (initial string name, SLIP/AsyncPPP only)

modem-init AT&FS0=1X1

#dial phone number (phone number string, SLIP/AsyncPPP only)

phone-num 5779110-6403

#baud rate (baud rate, SLIP/AsyncPPP only)

#(0:9600, 1:19200, 2:38400, 3:57600, 4:115200)

baud-rate 0

#port stat (enable/disable) port-stat disable

#ip address

ip-address 20.19.88.1

# subnet mask ip-netmask 255.255.255.0

#routing protocol type (0:RIPv1, 1:RIPv2, 2:RIPv1&2) routing-type 1

#routing operating mode (0:None, 1:Listen, 2:Talk, 3:Both) operating-mode 2

#ip routing stat (enable/disable)

ip-stat disable

#interface decription (string name) wan-port-2 WAN SCC 2 Interface

#interface protocol type (0:SLIP, 1:HDLC, 2:SyncPPP, 3:AsyncPPP)

protocol-type 1

#port stat (enable/disable)

port-stat disable

# ip address ip-address 40.19.88.1

# subnet mask ip-netmask 255.255.255.0

#routing protocol type (0:RIPv1, 1:RIPv2, 2:RIPv1&2) routing-type 2

#routing operating mode (0:None, 1:Listen, 2:Talk, 3:Both) operating-mode 3

#ip routing stat (enable/disable)

ip-stat disable

Appendix E – Configuration File 149