D-Link DI-1162 manual Configuring the LAN Port

DI-1162 Remote Access Router

Step 3a - Configuring the LAN Port

Preparing the router for connection to a LAN only requires enabling the LAN port, enabling IP networking and assigning the LAN port an IP address. After the LAN port is configured, all other features on the router can be configured remotely through the LAN by using the included Windows-based Router Configuration Utility or Telnet.

To configure the LAN:

1.The LAN port must be enabled in the Interface Configuration sub-menu.

♦ Choose Interface Configuration, LAN 1.

♦Position the cursor over the State item and press <space bar>. The State will change from Disable to Enable.

♦Position the cursor on the Save option at the bottom of the screen and press <Enter> to save the new setting.

Installation 17