D-Link DI-1162 manual Configuration File Example, 148

DI-1162 Remote Access Router

Configuration File Example

#The system configuration file for D-Link DI-1162 Remote Access Router

#DI-1162 runtime image file name (software update path and file name)

di1162-image d:\project\di1162\runtime\image\1162run\1162run.hdr

#sysname (string name)

sysname DI-1162 Remote Access Router

# syscontact (string name)

syscontact Engineering Administrater, Pongo

#syslocation (string name) syslocation Myson Building 6rd floor

#systimeout setting in minutes (0 means no timeout) systimeout 10

#telnet stat (enable/disable)

telnet enable

#ip routing stack (enable/disable) ip-routing enable

#interface decription (string name) lan-port-1 System Lan Interface

#port stat (enable/disable)

port-stat enable

# ip address ip-address 202.39.74.119

# subnet mask ip-netmask 255.255.255.0

#routing protocol type (0:RIPv1, 1:RIPv2, 2:RIPv1&2) routing-type 2

#routing operating mode (0:None, 1:Listen, 2:Talk, 3:Both) operating-mode 0

#ip routing stat (enable/disable)

ip-stat enable

#interface decription (string name) lan-port-2 Option Lan Interface

#port stat (enable/disable)

port-stat disable

# ip address ip-address 10.19.88.1

# subnet mask ip-netmask 255.255.255.0

#routing protocol type (0:RIPv1, 1:RIPv2, 2:RIPv1&2) routing-type 0

#routing operating mode (0:None, 1:Listen, 2:Talk, 3:Both) operating-mode 1

148 Appendix E – Configuration File