DCS Incoming inspection, Storage and transport, Rating plate, DCS 500B / DCF 500B or DCP 500B

Models: 500

1 76
Download 76 pages 28.4 Kb
Page 12
Image 12
Incoming inspection

Chapter 1 - Introduction

Incoming inspection

After opening this package, you should check whether it contains

 

the following items:

 

DCS 500B / DCF 500B or DCP 500B thyristor power con-

 

verter in the configuration ordered

 

DCS 500B / DCF 500B or DCP 500B publications

 

Accessories, including manuals if ordered

 

Final test report

 

Check the consignment for any signs of damage. If you find any,

 

please contact the insurance company or the supplier.

 

Check the particulars given on the unit's rating plate to make sure

 

prior to installation and start-up that you have received the correct

 

unit type and unit version.

 

If the consignment is incomplete or contains any incorrect items,

 

please contact the supplier.

 

 

 

CAUTION! The thyristor power converter weighs quite a lot and

 

should therefore not be held by the front cover. Please put the unit

 

down only on its back (sizes C1/C2/A5). Always use care when

 

handling the unit, so as to avoid injuries or damage.

Storage and transport

 

If the unit had been in storage prior to installation or is transported

 

to another location, care must be taken to ensure that the environ-

 

mental conditions are complied with (see "System Descriptions

 

DCS 500B / DCF 500B or DCP 500B").

Rating plate

For purposes of identification, each thyristor power converter is fit-

 

ted with rating plates, stating the type code and the serial number,

 

which serve for each unit's individual identification.

 

The type code contains information on the characteristics and the

 

configuration of the unit. The first three digits of the serial number

 

refer to the year and week of manufacture. The last digits complete

 

the serial number so as to preclude two units receiving the same

 

type code and the same serial number.

 

The 112xx group provides information on the unit's software con-

 

figuration.

 

The technical data and specifications are valid as of going to press.

 

ABB reserves the right to make subsequent alterations.

 

If you have any questions concerning your drive system, please

 

contact your local ABB agent.

IV A 1 - 2

DCS 500B / DCP 500B Operating Instructions

3ADW000055R0401_DCS500B_Operating Instruction_e_d

Page 12
Image 12
DCS manual Incoming inspection, Storage and transport, Rating plate, DCS 500B / DCF 500B or DCP 500B, IV A 1