1release tab
2card retainer
13.Connect any cables that should be attached to the card.
See the documentation for the card for information about the card's cable connections.
14.Press the card retention device back into its original position; push it down until it clicks into place.
1card retention device
2tab
15.Ensure that all connectors are properly cabled and firmly seated.
NOTICE: To connect a network cable, first plug the cable into the network device and then plug the cable into the computer.
16.Replace the computer cover (see Replacing the Computer Cover), reconnect the computer and devices to electrical outlets, and then turn them on.
17.If you installed a sound card:
a.Enter system setup, select Integrated Audio, and then change the setting to Off.
b.Connect external audio devices to the sound card's connectors. Do not connect external audio devices to the microphone, speaker/headphone, or
18.If you installed a network adapter card and want to disable the integrated network adapter:
a.Enter system setup, select Integrated NIC, and then change the setting to Off.
b.Connect the network cable to the network adapter cards connectors. Do not connect the network cable to the network connector on the back panel.
19.Install any drivers required for the card as described in the card documentation.
