3. Loosen the captive thumbscrews that secure the memory shroud and lift it away from the computer.
CAUTION:
4. Disconnect the power cables from memory riser cards 1 and 2.
1power connectors (4)
2memory module connectors (4)
3securing clips (2)
5.Grasp the memory riser card 1 at each corner and lift memory riser card 1 and attached card 2 from the DIMM_1 and DIMM_2 memory module connectors on the system board.
If a card is difficult to remove, gently ease it back and forth to remove it from the connector.
1memory riser cards 1 and 2
2memory riser cards 3 and 4
6.Disconnect the power cables from memory riser cards 3 and 4.