14.Enter system setup and select the appropriate Diskette Drive option (see System Setup).
15.Verify that your computer works correctly by running the Dell Diagnostics. See Dell Diagnostics.
Media Card Reader
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface on the computer.
NOTE: A floppy drive or Media Card Reader must be installed in the
Removing a Media Card Reader
1. Follow the procedures in Before You Begin.
CAUTION: Your computer is heavy (it has an approximate minimum weight of 55 lbs) and can be difficult to maneuver. Seek assistance before attempting to lift, move, or tilt it; this computer requires a
CAUTION: The computer stand should be installed at all times to ensure maximum system stability. Failure to install the stand could result in the computer tipping over, potentially resulting in bodily injury or damage to the computer.
2.Remove the computer cover (see Removing the Computer Cover).
3.Remove the drive panel (see Removing the Drive Panel).
4.Disconnect the interface cable from the back of the Media Card Reader.
5.Disconnect the other end of the interface cable from the system board connector labeled "USB." To locate system board connectors, see System Board Components.
1interface cable
2Media Card Reader connector (USB)
6.Slide the
