Fujitsu V6.00 manual Notational conventions, Screen outputs

Notational conventions

1.4Notational conventions

The following notational conventions are used in this manual:

VCaution This symbol points out hazards that can lead to personal

injury, loss of data or damage to equipment.

I

This symbol highlights important information and tips.

Ê	This symbol refers to a step that you must carry out in
	order to continue with the procedure.
italic	Commands, menu items, names of buttons, options,
	variables, file names and path names are shown in italics
	in descriptive text.
fixed font	System outputs are indicated using a fixed font.
semi-bold	Commands to be entered via the keyboard are written in a
fixed font	semi-bold fixed font.
[Key symbols]	Keys are shown according to their representation on the
	keyboard. If uppercase letters are to be entered explicitly,
	then the Shift key is shown, e.g. [SHIFT] - [A] for A.
	If two keys need to be pressed at the same time, this is
	shown by placing a hyphen between the two key symbols.

Table 1: Notational conventions

References to text or sections of text in this manual are shown with the chapter or section heading and the page on which that chapter or section begins.

Screen outputs

Please note that the screen output is dependent in part on the system used and therefore some details may not correspond exactly to the output you will see on your system. You may also see system-dependent differences in the menu items available.

ServerView Event Manager 11