MIB integration

The tool starts up and the following window is displayed:

Figure 17: “MIB Manager” tool

To integrate private MIBs, proceed as follows:

ÊSelect the relevant directory using the Browse... button.

ÊSelect the MIB and then click the Upload button. The tool then checks the MIB for correct syntax. In the next window a message shows the status.

ÊClick the Save parsed MIB button to integrate the MIB.

ÊIn the next window, select Close to close the tool.

IAfter a third-party MIB has been integrated, the Java plug-in cache must be cleared. Under Windows the ServerView Services must be restarted. Under Linux it is sufficient just to restart the SVForwardServer with:

/etc/init.d/sv_fwdserver restart.

Additional MIB integration under Linux

Beside the tool private MIBs can also be integrated under Linux operating systems as follows:

ÊStop the SVForwardServer service:

/etc/init.d/sv_fwdserver stop

ÊCopy the MIB to the directory

/opt/fujitsu/ServerViewSuite/web/cgi-bin/ServerView/ common/mibs.

ÊThen restart the SVForwardServer service:

/etc/init.d/sv_fwdserver start

172

ServerView Event Manager

Page 172
Image 172
Fujitsu V6.00 manual Additional MIB integration under Linux