Making pager settings (COM port and modem)

4.7Making pager settings (COM port and modem)

If you have selected Pager for the forwarding, the New Pager Configuration window opens. In this window you can use the Pager Settings and Modem Settings tabs to make the different settings for the serial interfaces and the modems connected to them (pager types).

You can define the following values:

The name of the available interfaces (e.g. COM2 or COM4)

The maximum transmission speed (baud rate)

The type of data flow control

The initialization and reset chain for the modem

The input fields in the New Pager Configuration window have the following meanings:

Name

Meaning

 

 

Description

Name of the pager settings

 

 

Owner

Name of the owner

 

 

Com Port

Name of the serial interfaces.

 

The drop-down list contains the names of the available

 

interfaces. You can select a specific interface or the entry Any

 

Available. If you select the latter, any available interface can be

 

connected to your COM ports. This is useful if you frequently

 

change the attached devices.

 

 

Pager Number

(Telephone) number of the pager

 

With a text message the destination number may have

 

Ito be preceded by an additional prefix of the relevant

 

pager service.

 

For example:

 

D1 service in Germany: 49171XXXXXXX

 

(XXXXXXX = pager ID)

 

Must be prefixed by 49171 (without 00)

 

D2 service in Germany: 0049172XXXXXXX

 

0049172 is optional

 

 

Table 11: Input fields in the Mail Settings window

ServerView Event Manager

69

Page 69
Image 69
Fujitsu V6.00 manual Making pager settings COM port and modem