Viewing alarms for a server
3.2Viewing alarms for a server
If several alarm messages have been received for a server, the one with the highest severity level is displayed in the server list. In the bottom display area you will only see information on the last alarm message received with this severity.
To get an overview of all alarm messages for this server, you can switch to the Alarm Monitor function for this server only.
One way of doing this is to select the server in the file tree and start the Alarm Monitor function via the menu bar in the Operations Manager main window.
A much quicker way is via the alarm icon (the alarm bell) in the server list. If you click the alarm icon, you switch to the Alarm Monitor function for this server only. This means that only the alarm messages for this particular server will be visible in the list section of the Operations Manager main window. Through appropriate selection of an alarm message in the alarm list, you can retrieve further information on every alarm message received in the display area.
3.3Filtering alarm entries
You can filter the alarm entries by clicking the corresponding filter icons in the header of the alarm list.
Filter icon in the header of the alarm list.
When you click the filter icon, the associated dialog Filtering for Column <column_name> opens in each case. Make your selection and confirm it with OK. Then, only the filtered entries will be displayed, depending on what you have selected. In the standard filter (Standard), all selection elements are selected via checkboxes. In the customized filter (Customize), you either enter your selection directly or using an asterisk as a placeholder. An active filter is indicated by a blue filter icon.
ServerView Event Manager | 25 |
