Viewing alarms

An executable program was triggered by this alarm.

This alarm was forwarded to the management station.

Table 3: Icons in the Alarm Monitor

In the bottom right section of the window you can find out information on the selected alarm entry in the alarm list via the two or three tabs provided:

Alarm Details tab - contains a brief description of the selected alarm entry in the alarm list.

Alarm Information tab - contains detailed information on the selected alarm entry as stored in the MIB.

Server Information tab - provides information on the server from which the selected alarm entry originates. Under General Information you will see general information about the server (e.g. system name, IP address, community name) and under Additional Information you will see additional information as stored in the Server Properties (e.g. administrator, location, model).

On this tab you will also find a link, depending on whether the server in question is entered in the ServerView server list or not.

If the server is in the server list, you can use the Edit Server Settings link to open the Server Properties window for this server, via which you can change the configured values for the server.

If the server is not in the ServerView server list, you can use the Add Server link to start the Server Browser and add the server to the list. For more information on the Server Properties and the Server Browser, see the ServerView Operations Manager User Guide.

IThe Server Information tab is only available if both the event manager and the Operations Manager are installed on the management station.

24

ServerView Event Manager

Page 24
Image 24
Fujitsu V6.00 manual Icons in the Alarm Monitor