
Processing alarm entries
IWhen the server starts up, a RAID manager or Ethernet card, etc. may issue an alarm (SNMP trap) as a startup notification (e.g. RFC1157LinkUP). To suppress this kind of alarm, you can configure alarm suppression. This function must be specified for each server. If multiple servers are monitored, configure this setting for each server using the alarm function.
3.4.3Resetting alarm suppression
You can reset an alarm suppression that has already been set. Proceed as follows:
ÊSelect Filter Settings from the context menu.
The Reset suppressings window opens, in which all previously set alarm suppressions are listed. To reset a suppression, proceed as follows:
ÊSelect the relevant suppression in the list.
ÊClick the Delete button.
ÊTo close the window, click the Close button.
The entry is removed from the list and the alarm setting is active again.
3.4.4Deleting alarms
To delete alarm entries, proceed as follows:
ÊSelect the alarm entries in the list.
ÊSelect Delete from the context menu.
IAlarms with the severity critical cannot be deleted until they have been acknowledged.
ServerView Event Manager | 27 |