GE 90-30/20/Micro manual Svcreq #9 Read Sweep Time from Beginning of Sweep

4

SVCREQ #9: Read Sweep Time from Beginning of Sweep

Use SVCREQ function #9 to read the time in milliseconds since the start of the sweep. The data is in 16-bit Word format.

Note

Of the CPUs discussed in this manual, Service Request 9 is supported only by 90-30 CPUs, beginning with Release 8.0.

The parameter block is an output parameter block only; it has a length of one word.

time since start of sweep

address

Example:

In the following example, the elapsed time from the start of the sweep is always read into location %R5200. If it is greater than the value in %R5201, internal coil %M0200 is turned on.

		_____		_____
%Q0102
—— ———		SVC_——————————		GT_ —
		REQ		WORD
						%M0200
CONST —FNC			%R5200—I1		Q——————————————————————————————————————————( )—
0009
%R5200—PARM			%R5201—I2
	_____		_____

4-150 Series 90-30/20/Micro Programmable Controllers Reference Manual–September 1998 GFK-0467K