Table 4-16Certificate configuration screens (continued)

●Update Pre-Installed Certificate Update the pre-installed, self-signed certificate. The certificate is overwritten. You can update the following items:

Certificate Validity Period

The browser identifies the certificate as self-signed for each new Web session, which can cause a security alert message. You can bypass this message by adding the certificate to the browser's certificate store or by disabling browser alerts (not recommended).

Self-signed certificates are not necessarily secure because the certificate owner is merely confirming his own identity instead of verification by a trusted third party. Certificates from a trusted third party are considered more secure.

Encryption Key Length

Select whether to use 1024 bit or 2048 bit encryption key length.

●Create Certificate Request You are prompted for specific device and organizational information in the following screen:

Certificate Information

Use this option when an authentication protocol requires that you install an HP Jetdirect certificate issued by a trusted third party or certificate authority.

●Install Certificate Displayed only if there is a pending HP Jetdirect certificate request (to a trusted third party). When the certificate is received, use this option to install it. Once installed, this certificate overwrites the pre-installed certificate. You are prompted for information in the following screen:

Install Certificate

The certificate to be installed must be associated with a previous certificate request generated by the HP Embedded Web Server.

●Install CA Certificate (Full-featured print servers only) Displayed when you click Configure to install a CA certificate required for selected authentication protocols. You are prompted for information in the following screen:

Install Certificate

●Import Certificate and Private Key Import a previously acquired and known certificate as the HP Jetdirect certificate. If you import a certificate, the currently installed certificate is overwritten. You are prompted for information in the following screen:

Import Certificate and Private Key

●Export Certificate and Private Key Export the HP Jetdirect certificate currently installed on the print server for use on other print servers. You are prompted for information in the following screen:

Export the HP Jetdirect certificate and private key

●Delete CA Certificate (Full-featured print servers only) Remove the CA certificate installed on the HP Jetdirect print server. Displayed when a CA certificate for EAP authentication is installed.

CAUTION: If the CA Certificate is deleted, EAP authentication is disabled and network access is denied.

The CA Certificate is also removed on a cold-reset of the print server, where factory-default settings are restored.

Certificate Validity screen. Specify how long the HP Jetdirect self-signed certificate is valid.

ENWW

Networking tab 95