Table C-1HP Jetdirect EIO Menu on Graphical Control Panel (continued)

Menu item

Sub-menu item

Sub-menu item

Values and Description

 

 

 

 

 

 

SNMP Test

Checks operation of SNMP communications by

 

 

 

accessing predefined SNMP objects on the device.

 

 

 

Yes: Select this test.

 

 

 

No: Do not select this test.

 

 

 

 

 

 

Data Path Test

Identify data path and corruption problems on an HP

 

 

 

postscript level 3 emulation device. Sends a

 

 

 

predefined PS file to the device. However, the file

 

 

 

does not print (paperless).

 

 

 

Yes: Select this test.

 

 

 

No: Do not select this test.

 

 

 

 

 

 

Select All Tests

Run all the embedded tests.

 

 

 

Yes: Run all tests.

 

 

 

No: Do not run all tests.

 

 

 

 

 

 

Execution Time [H]

Specify the length of time (in hours) that an

 

 

 

embedded test runs, using a value from 1 to 60. If you

 

 

 

select zero (0), the test runs indefinitely until an error

 

 

 

occurs or the device is turned off.

 

 

 

Data gathered from the HTTP, SNMP, and Data Path

 

 

 

tests is printed after the tests complete.

 

 

 

 

 

 

Execute

No (default): Do not run the selected tests.

 

 

 

Yes: Run the selected tests.

 

 

 

 

 

Ping Test

 

Test network communications. Sends link-level

 

 

 

packets to a remote network host, then waits for an

 

 

 

appropriate response.

 

 

 

 

 

 

Dest Type

Target device is an IPv4 or IPv6 node.

 

 

 

 

 

 

Dest IPv4

The IPv4 address.

 

 

 

 

 

 

Dest IPv6

The IPv6 address.

 

 

 

 

 

 

Packet Size

Size of each packet, in bytes, sent to the remote host.

 

 

 

The minimum is 64 (default) and the maximum is

 

 

 

2048.

 

 

 

 

 

 

Timeout

Length of time, in seconds, to wait for a response

 

 

 

from the remote host. The default is 1 and the

 

 

 

maximum is 100.

 

 

 

 

 

 

Count

Number of ping test packets to send. Select a value

 

 

 

from 1 to 100. Enter zero (0) to run the test

 

 

 

continuously.

 

 

 

 

 

 

Print Results

Print the test results (if not running continuously).

 

 

 

Yes: Print the results.

 

 

 

No (default): Do not print the results.

 

 

 

 

186 Appendix C HP Jetdirect control panel menus (V.45.xx.nn.xx)

ENWW