Table 3-3Telnet Commands and Parameters (continued)

bonjour-pri-svc

Highest priority Bonjour service to use for printing. Set this parameter using the following

 

values:

 

1: Port 9100 printing

 

2: IPP port printing

 

3: Default LPD raw queue

 

4: Default LPD text queue

 

5: Default LPD auto queue

 

6: Default LPD binps (binary PostScript) queue

 

7 through 12: If user-specified LPD queues are defined, corresponds to user-specified

 

LPD queues 5 through 10.

 

Although the default selection depends on the printer, it is typically Port 9100 printing or

 

LPD binps.

 

 

ftp-download

Download firmware upgrade files to the print server, using FTP.

 

0: Disable.

 

1 (default): Enable.

 

 

ttl-slp

IP multicast time-to-live (TTL) setting for SLP packets. The default value is 4 hops (the

 

number of routers from the local network). Set from 1 to 15 hops.

 

-1: Disable.

 

4 (default): Enable multicast TTL.

 

 

ipv4-multicast

Receive and transmit IP version 4 multicast packets by the print server.

 

0: Disable.

 

1 (default): Enable.

 

NOTE: If disabled, other protocols that use multicast protocols, such as Bonjour and

 

SLP, might also be disabled without notification.

 

 

idle-timeout

Seconds that an idle print data connection can remain open. Set from 1 to 3600

 

seconds.

 

0: Disable. Connection does not terminate. Other hosts cannot make a connection.

 

270 (default): Enable.

 

 

user-timeout

Seconds that a Telnet or FTP session is idle before it is automatically disconnected. Set

 

from 1 to 3600 seconds.

 

0: Disable.

 

900 (default): Enable.

 

CAUTION: Setting this to a short time period might disable Telnet/FTP, because a

 

session could terminate before changes can be made.

 

 

52 Chapter 3 TCP/IP configuration

ENWW