Table C-1HP Jetdirect EIO Menu on Graphical Control Panel (continued)

Menu item

Sub-menu item

Sub-menu item

Values and Description

 

 

 

 

 

 

DHCPv6 Policy

Router Specified: Router determines the stateful auto-

 

 

 

configuration method used by the print server. The

 

 

 

print server obtains its address, its configuration

 

 

 

information, or both from a DHCPv6 server.

 

 

 

Router Unavailable: If a router is not available, the

 

 

 

print server obtains its stateful configuration from a

 

 

 

DHCPv6 server.

 

 

 

Always: Print server always attempts to obtain its

 

 

 

stateful configuration from a DHCPv6 server.

 

 

 

 

 

 

Primary DNS

IPv6 address of the primary DNS server the print

 

 

 

server uses.

 

 

 

NOTE: Displays only if Manual configuration is a

 

 

 

higher priority than DHCP in the Config Precedence

 

 

 

table, when configured using the HP Embedded Web

 

 

 

Server.

 

 

 

 

 

 

Secondary DNS

IPv6 address for a secondary DNS server that the

 

 

 

print server uses.

 

 

 

NOTE: Displays only if Manual configuration is a

 

 

 

higher priority than DHCP in the Config Precedence

 

 

 

table, when configured using the HP Embedded Web

 

 

 

Server.

 

 

 

 

 

Proxy Server

 

Proxy server to use by embedded applications in the

 

 

 

device. A proxy server is typically used by network

 

 

 

clients for Internet access. The proxy server caches

 

 

 

Web pages and provides a degree of Internet

 

 

 

security.

 

 

 

Enter its IPv4 address or FQDN (up to 255 octets).

 

 

 

Contact your ISP for the proxy server address, when

 

 

 

required.

 

 

 

 

 

Proxy Port

 

Port number used by the proxy server for client

 

 

 

support. This port is reserved for proxy activity on

 

 

 

your network, and can be a value from 0 to 65535.

 

 

 

 

IPX/SPX

Enable

 

Off: Disable the IPX/SPX protocol.

 

 

 

On: Enable the IPX/SPX protocol.

 

 

 

NOTE: The factory default setting depends on the

 

 

 

print server model.

 

 

 

 

 

Frame Type

 

Frame-type setting for your network.

 

 

 

Auto: Sense all types and configure the first one

 

 

 

detected.

 

 

 

EN_8023, EN_II, EN_8022, and EN_SNAP: Frame-

 

 

 

type selections for Ethernet networks

 

 

 

 

ENWW

Graphical control panel menus 183