NOTE: The displayed AppleTalk parameters include the printer types that are advertised on the network.

The HP Jetdirect print server supports AppleTalk Phase 2 only.

Table 4-11AppleTalk tab settings

Item

Description

 

 

AppleTalk Enable

Select the check box to enable the AppleTalk protocol. Current AppleTalk parameters stored

 

on the print server are displayed.

 

NOTE: On HP Jetdirect 640n print servers, all network protocols except TCP/IP are

 

disabled by factory default.

 

 

AppleTalk Name

Name of the printer on the AppleTalk network. If you enter a name that is already assigned

 

on your network, a number is used to indicate the duplicate name.

 

 

Type

Printer type advertised on the network. Display up to two types (for example, HP LaserJet

 

and LaserWriter).

 

 

Zone

AppleTalk network zone for the printer. By default, the current zone is displayed.

 

Click the Refresh selected zone Info button to refresh the list of available zones.

 

 

DLC/LLC

Select or clear the check box to enable or disable DLC/LLC protocols on the HP Jetdirect print server.

NOTE: On HP Jetdirect 640n print servers, all network protocols except TCP/IP are disabled by factory default.

SNMP

Use the SNMP tab to specify or change the provided parameters. For a description of the items, see Table 4-12SNMP tab settings on page 84.

CAUTION: Hewlett-Packard recommends using HP Web Jetadmin to configure SNMP v3 and other security settings on the print server.

If you use the HP Embedded Web Server, existing SNMP v3 accounts are removed. In addition, you must implement the SNMP v3 account information on the SNMP management application. For more information, see SNMP v3 on page 98.

ENWW

Networking tab 83