Table
MessageDescription
BOOTP SERVER or
DHCP SERVER or
RARP SERVER
Displayed if BOOTP, DHCP, or RARP is used for TCP/IP configuration. Specifies the IP address of the system that responds to the HP Jetdirect print server's request for automatic TCP/IP configuration over the network.
Not Specified Configuration server's IP address could not be determined or was set to zero in the response packet.
BOOTP/DHCP SERVER | Displayed during initialization while the HP Jetdirect print server attempts to obtain its |
| TCP/IP configuration from a BOOTP or DHCP server. The temporary address |
| displayed is 0.0.0.0. |
|
|
TFTP SERVER | IP address of the system where the TFTP configuration file is located. During |
| initialization, the temporary address 0.0.0.0 is displayed. |
| Not Specified TFTP server is not set. |
|
|
WEB JETADMIN URL | If the HP Jetdirect print server is found on the network by HP Web Jetadmin, the URL |
| of the host system used for HP Web Jetadmin services is displayed. The URL is |
| limited to two lines and can be truncated. |
| Not Specified HP Web Jetadmin host system URL could not be identified or is not set. |
|
|
BONJOUR SERVICE NAME | Name assigned to this device or service. This name is persistent and is used to |
| resolve a particular device or service if socket information (such as the IP address) |
| changes from session to session. Apple Bonjour displays this service. The default |
| service name is the printer model and the LAN hardware (MAC) address. |
|
|
The following table includes items displayed under the IPv6 section of the configuration page.
Table
Message | Description |
|
|
STATUS | Current TCP/IPv6 status. |
| READY Print server is awaiting data. |
| DISABLED Manually disabled. |
| INITIALIZING Searching for the BOOTP server, or trying to get the configuration file |
| through TFTP. Additional status message might be displayed. |
| An error code and message is displayed if the print server is not ready. For more |
| information, see Table |
|
|
IPv6 link local address configured on the print server. | |
| Not Configured Address is not set. |
|
|
STATELESS | IPv6 stateless addresses configured on the print server. |
| Not Configured Address is not set. |
|
|
ENWW | HP Jetdirect configuration page 149 |