Table
Message | Description |
|
|
SNMP Get Cmty Name | SNMP get community name is configured on the HP Jetdirect print server. This is a |
| password to determine which SNMP GetRequests the HP Jetdirect print server |
| responds to. If a Get community name is set, the print server responds to either a |
| user specified community name or the |
| Not Specified Get community is not set. |
| Specified Get community is set. |
|
|
Access List | (IPv4 only) Access control list is configured on the HP Jetdirect print server. This list |
| specifies the IP address of individual systems, or IP network of systems, that are |
| allowed access to the print server and device. |
| Specified Host access list is configured. |
| Not Specified Host access list is not configured. |
|
|
Secure Web | Use encrypted communications between a browser and the HP Embedded Web |
| Server. |
| Optional (HTTPS/HTTP) Allows |
| ports, as well as encrypted communications using HTTPS. |
| HTTPS Required Allow only encrypted communications on HTTPS. |
|
|
This section provides IPsec error messages contained in the following table.
Table
Message | Description |
|
|
Deprecated Template | A Service template from a prior HP Jetdirect firmware version was detected. The |
| template is in one of the following states: |
| ● Configured as a predefined template and available for use. However, it might not |
| be valid. Upgrade the HP Jetdirect firmware to the most recent version. |
| ● Saved as a custom service template, which might have been replaced by a new |
| predefined version available for use. Review your IPsec/Firewall policy and |
| ensure the appropriate service templates are used. |
|
|
Upgrade HP Jetdirect Firmware | You should upgrade the firmware version on your HP Jetdirect print server. |
|
|
This section lists the IPv4 and IPv6 addresses configured on the print server.
IPsec StatisticsIPsec statistics gathered and reported by the print server are described in the following table.
162 Chapter 8 HP Jetdirect configuration pages | ENWW |