Table C-1HP Jetdirect EIO Menu on Graphical Control Panel (continued)

Menu item

Sub-menu item

Sub-menu item

Values and Description

 

 

 

 

 

Configure Keys

Transmit Key

Displays if WEP selected.

 

 

 

 

 

 

Entry Method

Format for WEP key entry.

 

 

 

Auto: Automatically generate a valid WEP key.

 

 

 

Alphanumeric: Alphanumeric ASCII characters (0–9,

 

 

 

a–z, A–Z). For 40/64-bit encryption, enter 5

 

 

 

characters. For 104/128-bit encryption, enter 13

 

 

 

characters. ASCII entries are case-sensitive.

 

 

 

HEX: Hexadecimal digits (0–9, a–f, A–F). For 40/64-

 

 

 

bit encryption, enter10 hexadecimal digits. For

 

 

 

104/128-bit encryption, enter 26 hexadecimal digits.

 

 

 

HEX entries are not case-sensitive.

 

 

 

 

 

 

Key (1 through 4)

The print server can store up to four WEP keys using

 

 

 

four key positions (Key 1, 2, 3, 4). To enter a WEP

 

 

 

key, specify the key position followed by the

 

 

 

encryption key value.

 

 

 

 

 

 

Reset 802.11

Reset the wireless 802.11 settings to their default

 

 

 

values (Yes or No).

 

 

 

 

TCP/IP

Enable

 

Off: Disable the TCP/IP protocol.

 

 

 

On (default): Enable the TCP/IP protocol.

 

 

 

 

 

Host Name

 

An alphanumeric string (up to 32 characters),

 

 

 

identifying the device. The default is NPIxxxxxx,

 

 

 

where xxxxxx is the last six digits of the LAN

 

 

 

hardware (MAC) address.

 

 

 

 

 

IPv4 Settings

Config Method

How TCP/IPv4 parameters are configured on the

 

 

 

HP Jetdirect print server.

 

 

 

BootP: Automatic configuration from a BootP server.

 

 

 

DHCP (default): Automatic configuration from a

 

 

 

DHCPv4 server. If a DHCP lease exists, use the

 

 

 

DHCP Release and DHCP Renew menus to set

 

 

 

DHCP lease options.

 

 

 

Auto IP: Automatic link-local IPv4 addressing. An

 

 

 

address in the form 169.254.x.x is assigned

 

 

 

automatically.

 

 

 

Manual: Manually configure TCP/IP4, using the

 

 

 

Manual Settings menu.

 

 

 

 

 

 

DHCP Release

Displays if Config Method is set to DHCP and a

 

 

 

DHCP lease exists for the print server.

 

 

 

No (default): Current DHCP lease is saved.

 

 

 

Yes: Current DHCP lease and the leased IP address

 

 

 

are released.

 

 

 

 

ENWW

Graphical control panel menus 181