Table 3-3Telnet Commands and Parameters (continued)

slp-keep-alive

Time (in minutes) the print server waits to send multicast packets on the network to

 

prevent deletion from network device tables. Some infrastructure devices, such as

 

switches, delete devices from their device tables due to inactivity on the network.

 

0: Disable.

 

1 to 1440: Enable.

 

 

slp-client-mode

Use the service location protocol (SLP) to locate and install printers on the network.

 

0 (default): Disable.

 

1: Enable.

 

 

syslog-protocol

Use the TCP or UDP port for syslog communication when logging security events.

 

6: PROTO_TCP.

 

17 (default): PROTO_UDP.

 

 

syslog-port

Valid port number of the TCP or UDP port for syslog communication when logging

 

security events. The valid range is from 1 to 65535. The default port number is 514.

 

 

bonjour-config

Use Bonjour. (Previously listed as multicast domain name system [mDNS services].)

 

Bonjour is typically used for IP address and name resolution, through UDP port 5353,

 

where a conventional DNS server is not available.

 

0: Disable.

 

1 (default): Enable.

 

To use Bonjour operation, you must enable multicast IPv4 (ipv4–multicast).

 

 

bonjour-svc-name

Bonjour service name. This name is persistent and is used to resolve a particular device

 

or service if socket information (such as the IP address) changes from session to

 

session. Apple Bonjour displays this service. The default service name is the printer

 

model and the LAN hardware (MAC) address. Enter up to 64 alphanumeric characters.

 

 

Bonjour Domain Name

(Read only.) Bonjour domain name assigned to the device, in the form <host

 

name>.local. If a user-specified host name is not assigned, the default host name

 

NPIxxxxxx is used, where xxxxxx are the last 6 digits of the LAN hardware (MAC)

 

address.

 

 

ENWW

IPv4 configuration 51